Papaya Orange: Soap Popsicle

you'll need....a popsicle mold...this one's from go planet earth...but you can certainly use whatever mold you want...small soap bags...also from go planet earth...popsicle sticks...and large binder clips....

also...grab some clear melt and pour soap...glass measuring cup...soap colorant...i prefer liquid over the powder or gel...fragrance oils...and rubbing alcohol in a spritzer bottle...

take your soap and cut up into chunks...and put in glass measuring cup...it takes about 2 1/4 ounces for one soapsicle...now that's solid weight...not liquid...

head on over to the microwave...you'll want to do 1 minute at 50% power...then...until it's completely melted...do 30 second bursts at 50% power...you want it to melt...but not to boil!...

once it's all melted...you'll want to spritz with rubbing alcohol...this takes the bubbles out of the soap...

add a couple of drops of colorant...a little goes a long way!...i tend to do a drop or two...stir...and decide if i like what i'm seeing...if not...add a drop more...

then add your fragrance oil...the amount is up to you and your sniffer!...make sure to stir!...

spritz again with the rubbing alcohol...keep on going until you don't see hardly any white bubbles...

pour slowly into your mold...

see all those nasty bubbles?...gotta get rid of 'em...

once again...spritz with your alcohol until it's pretty much bubbleless...is that even a word?...lol...

after you've filled all the popsicle slots that you want to...put the cover on...note...if you're wanting to do multiple ~~flavors~~ scents...you gotta act kinda quick...you can't have the soap setting up before you get the popsicle sticks in there!...

now...take the binder clips...and put on the popsicle sticks...i do this so that the sticks don't get lost when you put them in the mold...

insert all the sticks into the slots of where you've poured the soap...see how the binder clips just rest on top?...now...just leave it be!...it's going to take about an hour to set up!...

remove the binder clips from the sticks...then lift the top off...just slighty jiggle the stick...if it still moves....it's not set completely!...give it a little bit more time...

now...this might be the most difficult part of this project...getting 'em out of the mold!...it's tough!...anywho...you'll want to pry the sides of the mold from the soap at the top...this will start little air pockets...

you'll keep squeezing all around the mold...if you notice...there's little areas that you can see a color difference...this is because the soap has pulled away from the mold...you want to keep going until there's that difference in color everywhere...

starting pushing from the bottom...put a little muscle into it!...lol...eventually the soap will pop up a bit...

grab the stick and slide on out...

you'll want to air them out a bit...just in case there's condensation on the soap...i do this by just grabbing a piece of styrofoam and putting the stick in there...you'll want to let 'em hang out for a while...this makes it so much easier to put in the baggies!....

if you want your soap to look like it has a bite mark...you'll need to get a tiny little scalloped circle cutter...or...you could just take a nibble!...lol...

right on the corner...use the cutter...see...looks like little bucker marks!...

take your baggies and plop 'em in!...

twistie tie 'em up!...add a ribbon, label, or anything else you want!...

now...the one i just did was fruit punch ~~flavored~~ scented...but take another looksie at all the ones you can do up!...aren't they purty...sorry...that's my wv showing...lol...now of course...it's totally up to you whether or not you want to tell the kiddies it's soap....you can just let 'em find out for themselves!...lol...enjoy!...